Language:
switch to room list switch to menu My folders
Go to page: First ... 46 47 48 49 [50] 51 52 53 54 55
[#] Thu Oct 28 2021 12:37:48 MST from rss <>

Subject: MiSTer FPGA Sega Genesis - FPGA Emulation vs Genesis GX Plus - Sega Genesis Showdown!

[Reply] [ReplyQuoted] [Headers] [Print]

[#] Thu Oct 28 2021 14:48:11 MST from rss <>

Subject: Enabling Mister Cheats

[Reply] [ReplyQuoted] [Headers] [Print]

[#] Fri Oct 29 2021 03:04:24 MST from rss <>

Subject: Has anyone successfully gotten an analog joystick to work with the Apple II core?

[Reply] [ReplyQuoted] [Headers] [Print]

I have posted all of the steps that I have taken on the Mister FPGA forum without any responses. I have been trying for a week to get an analog stick to go right with no luck. All my research shows others with a similar issue except sometimes it is up or down. If someone can confirm it actually works I will keep trying otherwise I’ll move on. Thanks.

submitted by /u/H2TRSkins
[link] [comments]



[#] Fri Oct 29 2021 15:39:17 MST from rss <>

Subject: The new Raspberry Pi Zero 2 seems to work fine with MT32-PI

[Reply] [ReplyQuoted] [Headers] [Print]

[#] Fri Oct 29 2021 21:02:28 MST from rss <>

Subject: MiSTer FPGA - Sega System 16 Beta By Jotego - Cotton

[Reply] [ReplyQuoted] [Headers] [Print]

[#] Fri Oct 29 2021 23:40:18 MST from rss <>

Subject: Mister FPGA - Hauppauge HD PVR Rocket issue

[Reply] [ReplyQuoted] [Headers] [Print]

Hi guys,

Long time fan, first time buyer. Finally took the plunge and bought myself a Mister FPGA. I love it, except for 1 issue.

I have my capture card (Hauppauge HD PVR Rocket) plugged into my Mister. It outputs the video fine, but refuses to record. The device keeps blinking blue...which means it cannot record.

For the record:

  1. The capture card displays the video and audio just fine on my TV. It's not the output that's the problem. It's the inability to record.
  2. It's not the capture card that's the problem. All of my other devices with with my Hauppauge HD PVR Rocket.
  3. The capture card supports record at 1080p30 or 720p60, according to the website: https://www.hauppauge.com/pages/products/data_hdpvr-rocket.html#features
  4. I have a Hisense 50 inch TV. It supports 4K and 60Hz. Here are the specs: https://www.bestbuy.com/site/hisense-50-class-led-4k-uhd-smart-android-tv/6431212.p?skuId=6431212

Some troubleshooting steps I tried:

  • Changed "vsync_adjust" to 0, 1 and 2 (while resolution was on the default setting, which is 1280x720@60). Did not work.
  • The default video_mode is 1280x720. This is a 720p resolution, which should work on my TV and the capture card. But I cannot record.
  • Tried the resolution 1920x1080@60. This is 1080p resolution, which should work with my capture card (at 30 frames a second), but it does not work.
  • Tried 640x480@60 out of curiosity. Actually does display and record on this setting. Progress! But it's not ideal because it's blurry as hell, and only 4:3 resolution.
  • Tried 720x480@60. This one also displays and records. Awesome! Looks much better than 640x480, but I think I can do better.

Shouldn't 1280x720@60 work just fine on my capture card? The Hauppauge HD PVR Rocket supports recording at 720P at 60 frames a second, so I'm not sure why this doesn't work.

For the record, I really do love the community here, and I appreciate anyone's help. No one is required to help, I'm asking for too much. So I appreciate the time you all are taking to help a fellow gamer. In return, I will reply to everyone and try any steps you ask me too.

I'm aware not everyone owns a Hauppauge HD PVR Rocket, but maybe some people here are experts at getting capture devices to work. Maybe one of you had similar problems and found a way to fix it. Any ideas?

submitted by /u/pojr-official
[link] [comments]



[#] Sat Oct 30 2021 00:19:37 MST from rss <>

Subject: Analog IO Board User Port Issue.

[Reply] [ReplyQuoted] [Headers] [Print]

Just curious if anyone has experienced this: quite literally 10 minutes after I was able to get the Top300 DOS pack working in the AO486 core. I accidentally jarred the port a little disconnecting my MT-32pi and now it does not detect the device at all. Not in the menu, and the pi doesn’t turn on, although it is receiving power because i can see the board lighting up inside. I have an approved cable; and it was working for a bit so I dont feel like any of that is at fault. I had read in another forum that quite a few analog IO boards, from seemingly different makers had run into issues with the port. Anyways: I’ll probably take a closer look at the pins and solder and report back if I find anything.

submitted by /u/wickaboaggroove
[link] [comments]



[#] Sat Oct 30 2021 06:28:51 MST from rss <>

Subject: Is there any difference in picture quality between using a YPbPr or rgb with a crt/pvm?

[Reply] [ReplyQuoted] [Headers] [Print]

Hi everyone.. I own the MiSTer with the IO board, but just asking does the picture looks better with an rgb cable or its the same as using YPbPr component cable?

Thank you all in advance :)

submitted by /u/LlNK2PAST
[link] [comments]



[#] Sat Oct 30 2021 09:36:20 MST from rss <>

Subject: MiSTer PlayStation 1 Core Movie Decoder (MDEC) Finished

[Reply] [ReplyQuoted] [Headers] [Print]

[#] Sun Oct 31 2021 17:31:35 MST from rss <>

Subject: Finally got my Tien Fang HD15-to-SCART adapter. Includes a convenient switch to allow combing H&V sync into csync or not.

[Reply] [ReplyQuoted] [Headers] [Print]

[#] Mon Nov 01 2021 11:33:05 MST from rss <>

Subject: New Feature For MiSTer Neo Geo Core

[Reply] [ReplyQuoted] [Headers] [Print]

[#] Mon Nov 01 2021 16:41:40 MST from rss <>

Subject: MiSTer Multisystem Batch #2 Orders Open!

[Reply] [ReplyQuoted] [Headers] [Print]

[#] Tue Nov 02 2021 02:09:54 MST from rss <>

Subject: All new MiSTer Shareware DOS Pack with new MyMenu Front end

[Reply] [ReplyQuoted] [Headers] [Print]

[#] Tue Nov 02 2021 17:06:03 MST from rss <>

Subject: MiSTer Mini-ITX Ironclad Orders start this FRIDAY!

[Reply] [ReplyQuoted] [Headers] [Print]

[#] Tue Nov 02 2021 18:24:30 MST from rss <>

Subject: De10 nano

[Reply] [ReplyQuoted] [Headers] [Print]

Does anyone know of anywhere with stock of the de10 nano? Got all my add in boards sat there and everywhere seems to be on back order. Cheers

submitted by /u/Rob_bob2k6
[link] [comments]



[#] Tue Nov 02 2021 20:37:17 MST from rss <>

Subject: Could a core be split across multiple FPGAs?

[Reply] [ReplyQuoted] [Headers] [Print]

I keep seeing claims that an N64 core would be too big to fit on the DE10. Is it possible to split the core between some of the chips its recreating and have the two FPGAs talk to each other to create the whole system?

submitted by /u/SegaTime
[link] [comments]



[#] Wed Nov 03 2021 12:39:10 MST from rss <>

Subject: Cyberbots: Full Metal Madness - Robot Fighting Action! - on the Jotego MiSTer core

[Reply] [ReplyQuoted] [Headers] [Print]

[#] Thu Nov 04 2021 09:13:30 MST from rss <>

Subject: B&O MX 4000 for MiSTer?

[Reply] [ReplyQuoted] [Headers] [Print]

In anticipation of getting a miSTer, I kind of blindly bought a Bang & Olufsen MX 4000 CRT television. The price was good enough to justify the gamble.

Now the question is, is this actually a decent TV for the MiSTer? I bought it based on the brand name, but have no experience with the device and have no way to test it yet. Specs wise it should fit nicely on a desk, not taking up too much space.

submitted by /u/Gelezen123
[link] [comments]



[#] Thu Nov 04 2021 12:37:32 MST from rss <>

Subject: 5X Video Scale Mode on MiSTer FPGA - How To Setup!

[Reply] [ReplyQuoted] [Headers] [Print]

[#] Thu Nov 04 2021 13:47:48 MST from rss <>

Subject: How do you set up couch co-op in arcade games?

[Reply] [ReplyQuoted] [Headers] [Print]

I'm mainly into the 1 player experience, so never even thought about how I could set up a second controller in arcade games like Final Fight. Is this something really simple I haven't noticed or is this a feature that still needs to be implemented?

submitted by /u/moonscience
[link] [comments]



Go to page: First ... 46 47 48 49 [50] 51 52 53 54 55