Hi! I've been having trouble with the NeoGeo core for a looooong time. I try to download different ROM sets and no matter what I the games will not work. The visuals just get corrupted before the game properly loads. I've been told the Darksoft ROM set is best, but they only give me issues. Does anyone have any suggestions on a better ROM set? Or is there something else wrong?

Hello!

I'm looking for a nice piece to put in my basement dwelling, and given I absolutely despise latency a MiSTer based setup seems to be what I need.

Not super interested in building it - I want to get something that just works and play, essentially ;).

What are the best options, if any?

Hi all,

I just got my MISTer, but I cannot get it to work over component with either of my CRTs (which work fine with other sources). Here is what it looks like:
https://www.youtube.com/shorts/13ni4qXCs-c

I am using this cable:
https://www.amazon.com/dp/B001O8C6HM?psc=1&ref=ppx_pop_dt_b_asin_title&fbclid=IwAR2E4InC4khUx1Z_OYmJvB5884JWlcUUJjAwT2nsWJ_Ka9JatbYl1hMyxVc

I have set ypbpr=1

Any help would be greatly appreciated!!!

Fairly new to Mister FPGA. I'm interested in playing 2 or 3 DOS games but it seems that all my searches lead to this "Top 300 games" file in the archives which installs a VHD and all. The thing is, the SD card that came with my DE10 Nano is running out of space and downloading all the file parts for the Top 300 pack is gonna take hours (and then transferring the VHD to the SD card, which definitely won't fit).

I've only got my eye on a handful of DOS games. Is there any guide on how to install individual games? Or is it literally as easy as adding say, roms for the NES?

Thank you for any help you can provide.

I don't have any extra ram, no USB hub board, no Digital IO board. All of them are two weeks out from arriving. What can the DE-10 board just bare out of the box?

Anyone interested (it is in the box). I live in the Netherlands and will ship it within the EU for 180 euros +P+P accept pay pal.

Hi! I'm having issues with the VGA-to-composite/S-video adapter I bought from ultimatemister.com. My first issue was that the VGA port on the adapter had screw mounts, which made it impossible to attach to the MiSTer, which also had screw mounts. Because both male and female ends had screw mounts, it could not be attached to make a connection. So, I took small pliers to the screw mounts of the adapter and removed them. Now the metal exterior of the plug is very loose, but it can be actually plugged in now.

My second issue is that following the instructions don't seem to work:

1. Download Y/C cores through Update All script.
2. Change mister.ini settings to composite_sync=1 / vga_scaler=0 / direct_video=1 / ybpbpr=0
3. Set adapter to NTSC
4. Plug in adapter thru VGA and use composite cable connected to my CRT TV
5. Set MiSTer's sync on green switch to OVR (left position)

Following these instructions leaves me with no signal upon turning the MiSTer on. Is there something I'm doing wrong? I've watched every instructional YouTube video on this topic and I can't seem to figure it out.

Not Used for a year will accept 180 Euros + P +P accept payment via PayPal, live in NL will ship with in EU.

I'm trying to create a new SD card for Mister (updating from 16GB to 256GB). I didn't created the original one (got it as part of a bundle).

I downloaded the mr-fusion image, got it on the new SD card, booted the system with it, and it seems to run fine (setup was successful, got to the "home screen"). I was also able to get my keyboard connected, and setup WiFi.

My problem is that regardless of the script I run ("update" or "update_all"), it starts to run, I see it downloading and setting up the system. And after about 25 minutes HDMI stops working, the two LEDs for User and Reset are on, I can't SSH to Mister and nothing seems to run. I tried turning off the system and turn it on again, but it seems that the entire frontend-linux is simply not booting. My only solution is to re-image the SD card and repeat the process, but then Update kills it again.

I still have my previous 16GB card which is working fine, but I would like to scale up and get more games to run. Am I doing something wrong? While flashing images is not a complex thing to do, I'm just frustrated by this black-screen-of-death and not being able to SSH to Mister and "do" things to try and fix it. Also, googling for solutions didn't seem to get me further either.

Any help is appreciated...

Hi guys, merry Christmas to everyone.

After around a month of perfectly functional use, my mister started not recognizing my controllers properly. Sometimes they disconnected out of nowhere, and now most of the time I try to use it, it does what the video I attached shows. The thing is, after a while the controller randomly connects and I can play just fine for long periods of time.

I've tried different cables and an Xbox one controller that doesn't light up until it finally connects. I also tried plugging the mister in different outlets and a different house without any change.

I move it around quite a bit, but always with care. Maybe something is not well connected, or maybe it's an issue with the power supply?

Thanks in advance!!!